Blog

Taylor Forkilift go 4 Wheel Drive

BLT-TAYLOR TX4 SERIES FOR HARSH CONDITIONS

BLT SA’s extensive range of Taylor materials handling equipment – which encompasses loaded and empty container handlers, reach stackers and forklifts – now includes the TX4 series articulated 4-wheel drive forklift trucks, designed for moving materials in the harshest environments, including muddy and rough terrain.

“Unlike other comparable articulated forklifts, this series is not a front loader chassis with a fork attachment, but a robust articulated material handler, completely designed and engineered in the USA, to the highest standards, by Taylor Machine Works,” says Charity Gumede, marketing director, BLT SA. “TX4 all terrain forklifts – which can be fitted with specially designed attachments for various materials handling tasks – ensure efficient operation, low maintenance, optimum safety and extended service life in arduous conditions.”

Taylor TX4 series articulated 4-wheel drive forklifts

TX4 high lift forklifts, with an all welded steel chassis and frames for optimum strength, offer resistance to dynamic/shock loads. Optional heavy duty mast and carriage configurations are available to suit exact materials handling needs. The telescopic Ultra-Vu mast features a nested channel construction for clear visibility of the fork and other attachments. Double acting lift cylinders are positioned to the rear of the mast rails, while high strength multi-leaf lift chains are nested inside the mast rails. These machines have a 16° forward and backward mast tilting capacity.

Benefits of this robust series include a heavy duty bolted planetary drive axle; large, all terrain tyres for good traction in harsh environments and fully adjustable pin mounted forks, which are forged from heat treated steel, that allow for flexibility of operation.

There are three models in this range – TX4-250 and TX4-300 units are rated at 165 HP at 2 000 rpm for heavy duty industrial applications and the rated capacity for the TX4-360 is 190 HP at 2 200 rpm. These machines maintain their rated capacity, even at the full steer position.

Taylor low emission engines are tier certified, with lower fan and engine speeds for reduced noise levels. There are electronic diagnostics on the engine with a fault code history for fast problem location and a built in emergency shutdown system for the engine and transmission is standard. An engine mounted sealed fan shroud ensures maximum air flow and a seven-blade pusher fan blows dust and debris away from the operator.

These robust forklifts have a heavy duty four-speed powershift transmission with a high capacity 12 plate clutch system for enhanced durability. Other features include a full directional modulation for soft directional changes and operator controlled air inching for precise vehicle positioning in any environment.

A high capacity transmission oil cooler is part of the bolted three section cooling system. The cooler has wide fin spacing which reduces dirt build-up and provides efficient engine cooling for dependable operation in all conditions. A dual element air cleaner with a restriction indicator system offers engine protection and a remote mounted filter reduces oil spills. An exhaust purifier system is an optional environmental feature.

The fuel tank has a heavy gauge steel wall, with an integral strainer and lockable fuel cap. The newly designed fuel sensor has no moving parts.

For improved safety and visibility, the air snorkel and shielded exhausted are mounted on the corners of the cab for a clear view open for the operator. Dual panoramic interior rear view mirrors and external side mirrors are standard. Other safety features include overhead rear work lights, forward and reverse activated alarms, as well as safety rails and anti-slip steps. Axle mounted spring-on, hydraulic-off parking brakes, with a brake saver system, prevent the operator from driving through the parking brakes. Pedestrian cameras and monitors are optional.

To facilitate easy maintenance, the TX4 series has a forward tilting cab and a pivoting chassis for access to internal components. A sliding engine hood with swing away doors on both sides provide access to the engine, filters and dipsticks. Brakes are easily serviceable without the need for axle disassembly. Re-set circuit breakers are used throughout the truck instead of conventional fuses. For easy identification, all wiring is colour and number coded. Frame channels ensure clean and protected routing of wiring and hoses.

A frame bar can be placed between the articulated sections for transportation or servicing.

The TXB’s ergonomically designed, uncluttered operator station is one of the most spacious all-steel cabs in the industry. Features include increased leg and head room, an adjustable arm rest and sound insulation. A vinyl or cloth mechanical suspension seat rotates 15° left and 20° right. Air-conditioning is optional.

An adjustable fingertip electric joystick control on the hinge-down instrument panel ensures smooth and precise handling. Steering on a tilt steering wheel is fully hydrostatic. There are two brake pedals – the left pedal controls both brake and inching and the right pedal is for brakes only.

The Taylor range of materials handling equipment is distributed exclusively throughout Africa by BLT SA, which solves materials handling requirements by providing a custom machine design service and the supply of specialised attachments to cope with exact tasks. BLT SA also offers a technical advisory, support and spare parts service.

Caption

BLT SA’s extensive range of Taylor materials handling equipment includes the TX4 series articulated 4-wheel drive forklift trucks, designed for moving materials in the harshest environments, including muddy and rough terrain.

Released by Lindy Morton, Festivitas or 083 268 6666 Email: festivitas@dbnmail.co.za

For further information Charity Gumede, Marketing Director, BLT SA

PO Box 12392, Jacobs, 4026

Telephone (031) 274 8270

Fax (031) 205 8002

Email charity@blt.co.za Web: www.blt.co.za

November 17, 2014
Comments Off
Read More

Bulk Material Handling – Coal

bltsa-coal-materials-handling…one

Samson bulk material receiving unit - coal

BLT SA supplies a range of robust bulk handling equipment that provides efficient solutions for the handling of minerals and concentrates in diverse industries, including the coal mining sector.

“Samson automated handling systems offer reliable performance – from truck intake, using the Samson surface feeder – to mobile stacking and ship loading solutions,” says Charity Gumede, marketing director for BLT SA’s Samson bulk materials handling equipment. “Reliable handling equipment plays a critical role in complex logistic operations required to deliver materials on time and to specification, with minimal environmental impact.

“Economical transportation of coal demands the efficient use of rail, road and sea shipment for long distances, with truck or conveyor haulage for short runs at the mine or quarry.

“Samson handling equipment is known globally for flexibility, with no compromise on performance, environmental standards, reliability or safety. These systems, which require minimal civil works, are designed to join together fixed and mobile equipment, providing a cost efficient alternative to fixed bulk handling installations. Operating costs and maintenance requirements are significantly lower than with conventional materials handling systems.”

Samson’s Stormajor radial boom stacker combines the benefits of the Samson material feeder unit with a radial outloading boom, into a single mobile unit that is able to receive material from tipping trucks and loading shovels.

The buffer holding capacity of the integral Samson receiving unit enables efficient truck unloading during tipping truck deliveries. Material is drawn from the tipping truck in a controlled stream, which means dust generation is significantly reduced, minimising environmental pollution.

With the radial boom feature, this fully integrated machine is able to efficiently create economical stockpiles, with minimal machine movements. Using a hydraulic cylinder in tension, a wide angular range may be accommodated allowing the boom to be lowered almost horizontal. This system allows material with a low repose angle to be stockpiled at steep conveyor angles, without material engulfing the main axle wheels. A single machine may be used for different stockpile areas handling different materials, with minimal capital investment.

There are three capacity ranges of the conveyor, which are based on the belt width of the out loading boom conveyor. A belt width of 800 mm offers a handling rate of 450 m³/h, a 1 000 mm width belt has a 4750 m³/h rate and a belt width of 1 200 mm offers a rate of 1 250 m³/h.

These units have various specification options suitable for handling different materials, from cereals to heavy mineral ores.

Samson material feeders – a flexible and cost efficient alternative to conventional underground hoppers, are installed above ground by simply being bolted to a flat concrete slab foundation, eliminating the need for truck ramps and costly civil engineering works. Even in fixed installations this portable system can be easily relocated for future plant development.

The Samson range of bulk materials handling equipment, which includes link conveyors, grab hoppers, surface feeders, radial boom stackers and mobile shiploaders, is available in Southern Africa exclusively from BLT SA.

The company offers a technical advisory, parts and support service.

Captions

Samson Stormajor radial boom stacker

Samson’s Stormajor radial boom stacker combines the benefits of the Samson material feeder unit with a radial outloading boom, into a single mobile unit that is able to receive material from tipping trucks and loading shovels.

Samson bulk material receiving unit

Samson surface feeders receive bulk materials directly from tipping trucks and loading shovels, providing a buffer storage capacity, without the need for large ramps or underground pits. Since material is drawn from the tipping truck in a controlled stream, dust generation is significantly reduced, minimising environmental pollution.

Released by Lindy Morton, Festivitas Telephone (031) 502 2374 or 083 268 6666

For further information Charity Gumede, Marketing Director BLT SA

Telephone: 083 518 7345 Email: charity@blt.co.za Web: www.blt.co.za

September 2014

November 12, 2014
Comments Off
Read More

Novatech

About Novatech

Experts in Bulk Handling : SAMSON Materials Handling Ltd. have provided a range of specialist engineering solutions to the bulk materials handling industry since 1966. Our experience is your guarantee of effective performance and long term satisfaction with maximum reliability and absolute minimum overall cost of ownership. Samson range encompasses material feeders, link conveyors, grab hoppers, telescopic radial boom stackers and mobile ship loaders. Service: BLT SA supports this range with a technical engineering back-up, spare parts, maintenance service and after sales support. Operator training and a condition monitoring service for equipment are also provided.

Full Product Range

  • Equipment for shipping industry
  • Special transport equipment
  • Ports & Terminals – Shiploaders
  • Roll Trailers
  • Agriculture Trailers

     

  • novatech_wind_tower_handling_machine

  •  

  • novatech_pipe_casette

  • novatech_container_spreader

  • novatech_low_casette2

  • novatech_goose_neck_with_stand

  • novatech_low_casette

  • novatech_dolly_disassembled

  • novatech_terminal_trailer

Latest News

    Full Novatech product range

    Trailer Stands

    novatech_trailer_stand2 novatech_trailer_stand
    novatech_goose_neck_with_stand

    Terminal Trailers

    novatech_terminal_trailer novatech_single_axle_terminal_trailer
    novatech_coil_trailer novatech_low_boy_trailer

    Roll Trailers

    novatech_roll_trailer_with_fixed_goose_neck novatech_roll_trailer_with_goose_neck
    novatech_roll_trailers

    Container Spreaders

    novatech_container_spreader

    Wind Towers

    novatech_wind_tower_handling_machine

    Dolly

    novatech_load_carrying_dolly novatech_load_carrying_dolly2
    novatech_dolly_disassembled novatech_dolly

    Loading Casette

    novatech_pipe_casette novatech_low_casette2
    novatech_low_casette

    Request Brochures





    Your Name (required)

    Your Email (required)

    Request for Novatech Brochures

    Please indicate which Novatech Brochures you would like

    captcha

    August 18, 2014
    Comments Off
    Read More

    Meclift

    About Meclift

    Meclift ‘Variable Reach Trucks’ Meclift Models cover capacities from 12-50 tonnes Machines are tailored for loading and unloading containers and inside of vessels The most versatile equipment you will ever own! The Meclift can load/unload and stack empty containers three high! The Meclift 1612R can take 16 tons and drive completely inside the container for faster loading/unloading BLT SA offers full Maintenance and Service support

    Solutions

    • Warehousing
    • Small and Big Distribution Centres
    • Project Cargo Handling
    • Container Yards
    • Import and Exporters
    • Steel & Stainless Steel Industry
    • Meclift_ML1612R_New-Cabin
    • Meclift_ML1612R_New-Cabin
    • Meclift_ML1612R_New-Cabin
    • Meclift_ML1612R_Winch
    • Meclift_ML1612R_Winch
    • Meclift_ML1612R_Coil-Clamp
    • Meclift_ML1612R_Coil-Clamp
    • Meclift_ML1612R_Coil-Ram
    • Meclift_ML1612R_Coil-Ram
    • Meclift_ML1612R_Coil-Ram

    Latest News

      Models

      Meclift ML1612R

      Meclift ML1612R –

      • Take 16 Tonnes and drive completely inside a container
      • Stack 20ft Containers 3 high
      • Hydraulically movable cabin provides excellent visibility
      • Speed up your container loading/unloading operation
      Meclift ML1612R_1 Meclift ML1612R_2
      Meclift ML1612R_3 Meclift ML1612R_4

      Coil Ram – The Meclift Variable Reach Truck with a Coil Ram attachment is a superior combination when handling steel coils. By means of a Coil Ram any Meclift Variable Reach Truck can handle coils within its lifting capacity.

      Coil Ram1 Coil Ram2

      Coil Clamps – Meclift Variable Reach Trucks equipped with the Coil Clamps can also be used to load and unload containers or trailers. Switching from one work phase to another is effortless and quick due to easy change of tools. Because working conditions vary from location to location, the Coil Clamps can be tailored and adjusted according to each customer’s specific needs.
      CoilClamp1

      Air Cargo Pallet Forks – The Meclift Air Cargo Pallet Forks (ACPF) are designed for cargo handling at airports, where keeping up with timetables is essential. It enables to load and unload air cargo efficiently and smoothly without hassle and unnecessary, time-consuming work phases.

      Double Forks System -

      Loading Box -

      Meclift ML3012R/C

      Meclift ML3012R/C

      • Take 35,000 lbs and driving completely inside a container
      • Stack 20ft Container 3 high
      • Hydraulically movable cabin provides excellent visibility
      • Speed up your container loading/unloading operation

      Meclift ML5012R

      Meclift ML5012R

      • The ML5012R is the heaviest model in the range of Meclift variable reach trucks. It has a lifting capacity of 50 tons at a load center of 1,200 mm.
      • The horizontal boom structure and relatively small outer dimensions enable it to handle heavy loads in confined spaces like the inside of cargo vessels, without limiting its maximum lifting height.
      • The ML5012R’s reaching feature eases handling of material on many occasions since you don’t have to drive the machine right beside the load in order to lift it.
      • The lifting capacity at a full reach of 2,250 mm is 25 tons.

      Meclift ML5016SR

      Meclift ML5016SR

      • The Meclift side reach stacker ML5016SR provides an alternative for handling containers in confined spaces.
      • It has a lifting capacity of 42.5 tons under the top lift spreader at a load center of 1.6 meters. It can stack containers up to three high with duplex booms and even four high with triplex booms.
      • With a container lifted to the top of its frame it can move at speeds up to 30 km/h. As the container is loaded on the top of the machine, it can be handled in very tight places and driven through a standard 6 by 5 meter terminal door opening. It is also possible to handle two attached containers at the same time.
      • The Meclift ML5016SR is a fine choice for enhancing the logistics between railroads and highways. It is made only by special order.

      Meclift ML35CM

      Meclift ML35CM

      • The ML35CM is an attachment for a terminal tractor designed to move containers at locations such as terminal areas.
      • Powered by hydraulics of the terminal tractor.
      • Length is automatically adjustable for different sizes of containers.
      • Height is adjustable to load containers on and off of trailers.
      • Ideal for facilities where there is no need to stack.
      • Easily drives inside of a warehouse.

      Meclift ML1206C

      Meclift ML1206C
      The Meclift ML1206C is a straight-mast truck that completes the Meclift’s product range. The truck has a lifting capacity of 12 tons at a load centre of 600 mm. The ML1206C is designed to fit into a standard container. With a free lift of up to 950 mm and the ability to side shift the forks you can load objects into a container precisely and even stack them on top of one another. The total lifting height of the machine is 1,900 mm.

      Brochures

      15858 ML5012R_brochure 15865 ML36CM_ Brochure 15867 ML3012RC_ Brochure
      ML5012R Variable Reach Truck ML36CM Container Mover ML3012RC Variable Reach Truck
      15868 ML5016SR_ Brochure 15869 Double forks system_ Brochure 15870 Coil Ram_ Brochure
      ML5016SR Side Reach Stacker Double Forks System Attachment Coil Ram Attachment
      15871 Loading box_ Brochure 15872 Coil Clamps_ Brochure 15873 Air Cargo Pallet Forks_Brochure
      Loading Box Attachment Coil Clamps Attachment Air Cargo Pallet Forks Attachment
      meclift non-stop presentation 2014
      Meclift Full Product Range Presentation

      Request Brochures





      Your Name (required)

      Your Email (required)

      Request for Meclift Brochures

      Please indicate which Meclift Brochures you would like

      captcha

      August 18, 2014
      Comments Off
      Read More

      Taylor

      About Taylor

      TAYLOR – Since 1927 “engineer and build for what you need.”
      Company Outline: United States’ leading manufacturers of industrial forklift and material handling equipment, with over 100 models ranging in lift capacity from 7,000 kg to an astounding 54,0000 kg.

      Solutions

      • Warehouses
      • Distribution Centres
      • Lumber Yards
      • Timber Industry
      • Container Depots
      • Ports & Terminals

      Why Taylor

      • Lower total operating costs
      • Performance
      • Durability
      • Serviceability
      • Operator ergonomics

      Full Taylor Product Range

      All machine controls are integrated using solid state controllers and J1939 CANbus technology. This allows controllers and sensors to communicate with minimal wiring between the components. I/O modules are used to eliminate electromechanical relay devices and add reliability to the machine control system. J1939 CANbus technology allows all machine data to be accessed through the main color display located in the cab. This display shows engine data along with warnings, spreader status lights, and man/ machine interface data. The display allows service personnel to access data needed during troubleshooting (such as sensor status and controller outputs). Machine functions can be tuned through the main display in the cab. Tuning functions are password protected to prevent operator access.

      Container Handlers

      TLXC Series – ‘More stable platform than previous models’
      The TXLC Series loaded container handlers are built for more stable platform by anchoring the tilt cylinders to the counter-weight, further back than on previous models.

      Each model in the TXLC line features improved hydraulics and the addition of TICS, Taylor Intergrated Control System, which is capable of monitoring and diagnosing vital system components.
      The TXLC-975 has a rated capacity of 41,000kg in the first and second tiers and 36,000kg in the third, fourth, and fifth tiers at 97-inch center of load. At 106-inch center of load, the capacity for the TXLC-975 is 37,000 kg in the first and second tiers and 34,000kg. in the third, fourth, and fifth tiers.

      The TXLC-976 has a rated capacity of 41,000kg. in the first and second tiers and 36,000kg in the third, fourth, fifth, and sixth tiers at 97-inch center of load. At 106-inch center of load, the capacity for the TXLC-976 is 37,000kg in the first and second tiers and 34,000kg in the third, fourth, fifth, and sixth tiers.

      TS Series – Reach Stackers ‘Sets new trends in reach stacker container handling’

      The new TS-9972 Reach Stacker is the most durable, comfortable, and user friendly truck in the industry. The TS-9972 has all the durability and dependability that you have come to expect form Taylor and BLT after sales support.

      The TS-9972 has a first row rated capacity of 45,000kg in the first, second, third, and fourth tiers and 41,000kg in the fifth tiers for 9.5-ft. containers.

      TS-1068

      The TS-1068 has a first row rated capacity of 45,300kg in the first, second, third, and fourth tiers and 34,000kg in the fifth tiers for 9.5-ft. containers. The TS-1068 is equipped with front stabilizers for increased load capacity.

      TS1068

      Empty Handlers

      “Big Red” empty container handlers reflect the experience and knowledge gained during those years. Taylor empty container handlers are “All American,” designed and built in the USA.

      Taylor’s empty container handlers are equipped with a wide assortment of masts and attachments to better meet your particular need. The following list shows the standard mast and attachment by model.

      TXEC-155/6

      • 42-ft. ULTRA-VU Mast
      • Empty Side Post Container Attachment with Two ISO Rear Twistlocks
      • ± 20-inch Side Shift

      TXEC-205/6

      • 46-ft. ULTRA-VU Mast
      • Empty Side Post Container Attachment with Two ISO Rear Twistlocks
      • ± 24-inch Side Shift

      TXEC-206/7

      • 54-ft. 6-in. ULTRA-VU Mast
      • Empty Side Post Container Attachment with Two ISO Rear Twistlocks
      • ± 24-inch Side Shift

      TXEC-207/8

      • 63-ft. ULTRA-VU Mast
      • Empty Side Post Container Attachment with Two ISO Rear Twistlocks
      • ± 24-inch Side Shift

      Industrial Pneumatic Tire Forklift

      TX Series – 24’ Inch load centre with ranging capacity from 7,000 – 16,000kg. Industrial Pneumatic Forklifts were designed and engineered with the operator and service personnel in mind. Comprised standard features with increased leg and head room, tilt steering wheel, shock mounted center mounted operator station, fingertip electric joystick controls, and CANbus technology for operator comfort and convenience. Available in five different wheelbases, the TX Series has the right truck for your application.

      TXB Series “For rough terrain”

      These are the most durable, most powerful, and the most manoeuvrable high-capacity rough terrain forklifts available to the wood products industry. Taylor Machine Works is the only USA manufacturer who designs and builds rough terrain forklifts with 8,200kg to 13,600kg rated capacities.

      TXB Series

      Mid Capacity Pneumatic Tire Forklifts – Environmentally conscious

      The TXi Series – line of pneumatic tire forklift trucks currently includes six heavy-duty models rated with capacities ranging from 18,000kg to 30,000kg, these also include higher capacity models rated at 48-in load centre with capacities from 23,500 to 32,000kg.

      Why TXI Series – Matched power trains – Rigid chassis construction, highest quality components, operator safety, high visibility masts, and the best parts and service support make these TXi Series models an excellent choice for mid-capacity pneumatic tire forklift trucks.

      Industrial & Heavy Duty Forklifts

      TXH Series 48” load center 13,000 – 18,000kg

      TX & TXH Series 36,000 – 42,000kg – ‘Break Bulk Stevedoring’

      Articulated 4WD Forklifts

      TX4 Series – 4-wheel drive (4WD) forklifts were specifically designed for one task, moving material in the harshest environments imaginable. Whether it’s gravel, mud, or rough terrain – the TX4 delivers unparalleled performance. Unlike other comparable articulated forklifts, this is not a front loader chassis with a fork attachment, but an articulated material handler completely designed and engineered by Taylor Machine Works.

      TX4-A-031_small TX4-A-098_small

      Cushion Tire Forklifts

      XC and THC Series – The XC Series of cushion tire forklift trucks answers the call by incorporating a “hang-on” design counterweight that allows quick and simple one bolt removal. Easy removable panels, swing-out/flip-down LPG tank mounts, and large, hinged doors provide access to engine and transmission major components and service points. Rated capacity ranging from 8,000 – 16,000kg. Cushion tire trucks are primarily designed for smooth surface use. Whether in a factory or warehouse environment, the THC Series provides unparalleled performance and manoeuvrable. The THC Series consists of four models with a rated capacity ranging from 11,000 – 23,000kg

      Request Brochures





      Your Name (required)

      Your Email (required)

      Request for Taylor Brochures

      Please indicate which Taylor Brochures you would like

      captcha

      August 18, 2014
      Comments Off
      Read More

      Samson

      About Samson

      Experts in Bulk Handling : SAMSON Materials Handling Ltd. have provided a range of specialist engineering solutions to the bulk materials handling industry since 1966. Our experience is your guarantee of effective performance and long term satisfaction with maximum reliability and absolute minimum overall cost of ownership. Samson range encompasses material feeders, link conveyors, grab hoppers, telescopic radial boom stackers and mobile ship loaders. Service: BLT SA supports this range with a technical engineering back-up, spare parts, maintenance service and after sales support. Operator training and a condition monitoring service for equipment are also provided.

      Solution

      • Mining & Minerals – Feeders
      • Environmental – Biomass
      • Ports & Terminals – Shiploaders
      • Steel Industry – Feeders
      • Power Industry – Feeders, Boom Feeders, Link Conveyors
      • Foods Stuff & Agriculture

      Full Samson product range

      Material Feeder

      With over 40 years’ experience in the bulk material handling industry, the SAMSON Material Feeder is the original design developed to satisfy the needs of customers who required a mobile solution to receive general bulk materials. Samson material feeder is capable of receiving material from:

      • Articulated Dump Truck
      • Front End Loader
      • Side Tipper Trucks
      • Back Tipper Trucks
      Samson_Material Feeder Wheeled Samson_Material Feeder Wheeled_small
      Samson Material Feeder

      Stormajor Tracked Boom Feeder

      The Stormajor combines the benefits of the SAMSON® feeder unit with a Radial Outloading Boom both mounted to a common chassis as a fully integrated mobile stacker machine able to receive material both from tipping trucks and loading. The Stormajor® is compact and offers vast stacking capacity to 20 meters height with the minimum of machine movements and loading rates to 1,500 tons per hour.

      Stormajor Boom Feeder Stormajor_boom feeder
      Samson_BF0415T3_small Samson_BF0415T11_small

      Shiploader

      Samson offer the most comprehensive range of Mobile Shiploaders available with specialized facilities designed for port and terminal operations. Loading capacity reaches up to 2,000 t/h, depending of the specifics of the material being handled. With the optional integrated SAMSON MaterialFeeder equipment the mobile Shiploader accepts dry bulk cargos direct from tipping trucks eliminating the need for any fixed equipment or dedicated port infrastructure.

      Ship_Loader Samson_Shiploder_small
      MP_05_Yarmouth_Grain ship_outer harbour_aerial

      Link Conveyors

      A mobile Link Conveyor provides a flexible solution to connect fixed and mobile equipment in Quarries and Ports retaining maximum flexibility and eliminating any need for fixed conveyors in the working area, available with handling rates to 3,000 tons per hour.

      Samson_Link Conveyor_small Samson_TC1245W2_small

      Eco Hoppers

      The hoppers are designed to suit the characteristics and flow properties of virtually any bulk material. The Eco Hopper from SAMSON is an economical and ecologically sensitive solution fulfilling all needs for the efficient import of dry bulk cargoes. Rates of 5,000 t/h may be achieved, subject to the grab crane performance.

      Eco Hopper_small Samsson_Eco Hopper 2_small

      Brochures

      Link Conveyor Current Version SAMSON Alternative Fuels Feeder SAMSON Biomass Logistics
      Link Conveyor Samson Alternative Fuel Feeder Biomass Logistics
      SAMSON Bulk Handling SAMSON Eco-Hopper SAMSON Material Feeder
      Bulk Handling Eco Hopper Samson Material Feeder
      SAMSON Minerals Logistics SAMSON Mobile Shiploaders SAMSON Ports & Terminals
      Mineral Logistics Mobile Shiploader Ports & Terminals
      SAMSON Stormajor SAMSON Telescopic Conveyor TC1030W
      Stormajor Radial Boom Stacker Telescopic Conveyor

      Request Brochures





      Your Name (required)

      Your Email (required)

      Request for Samson Brochures

      Please indicate which Samson Brochures you would like

      captcha

      August 18, 2014
      Comments Off
      Read More

      Capacity

      About Capacity

      BLT South Africa proudly offer Capacity spotting tractors who believe a spotting tractor is only as good, as its comfort, price, and durability. Their ISO 9001 tractors continue to be the most durable spotting tractors in the industry. Some of the features that the tractors offer are:

      • Exclusive Dura-Ride Air Spring Suspension System Available
      • Dedicated Cab Platform with Complete In-House Cab Construction
      • High Strength Frame, RBM 4,248,960 in. Lbs.
      • Exclusive Dura-PlusTM 10-Year Frame Warranty Available
      • Durable Metal Dash with Printed Circuit Board
      • Exclusive Lifetime Paint Warranty
      • Models Available for Immediate Delivery

      Capacity of Texas is considered a world class supplier, with units operating globally.

      Solution

      • Ports & Terminal
      • Yards
      • Distribution centers
      • Warehousing

      Product range

      Product range1 Product range 3
      Product Range4 Product Range2

      Request Brochures





      Your Name (required)

      Your Email (required)

      Request for Capacity Brochures

      Please indicate which Capacity Brochures you would like

      captcha

      August 18, 2014
      Comments Off
      Read More

      (Southern Africa) Dezzi

      About Dezzi

      For over 30 years Desmond Equipment has been designing and manufacturing the Dezzi range equipment.
      BLT is the local distributors for Dezzi range of equipment, offering sales, rentals, 24hour after sales support and maintenance.

      Dezzi range of equipment offers solutions to the following industries:

      • Construction
      • Mining
      • Quarrying
      • Forestry
      • Sugar
      • Industrial
      • Harbour bulk handling
      • Dezzi_Shunting-Tractor
      • H90_Dezzi-Hauler
      • Dezzi_1200-LP
      • Dezzi_1700
      • Dezzi_AD30B

      Latest News

        Full Dezzi product range

        Front End Loaders

        Front loader1 Front loader2

        Articulated Dump Trucks

        dump truck1 dump truck2

        Shanting Tractors

        shanting truck1

        Articulated Haulers

        Articulated Hauler1 Articulated hauler2

        Dezzi Haulers

        H90_Dezzi Hauler1 H90_Dezzi Hauler2
        H90_Dezzi Hauler3

        Request Brochures





        Your Name (required)

        Your Email (required)

        Request for Dezzi Brochures

        Please indicate which Dezzi Brochures you would like

        captcha

        August 18, 2014
        Comments Off
        Read More
        Page 1 of 212
        Copyright Big Lift Trucks © 2015